How to Alter My Skirt from Small to Big Yourself
Embarking on a DIY project to alter your skirt from small to big is a rewarding way to breathe new life into your wardrobe. Whether you’ve gained a few pounds or simply want to update the fit of your favorite skirt, this guide will walk you through the process of making the necessary adjustments. With a few basic tools and a bit of patience, you can transform your skirt into a comfortable and stylish piece that fits perfectly.
Materials Needed
Before you begin, gather the following materials:
– Your skirt
– Measuring tape
– Scissors
– Pins
– Thread and needle
– Fabric marker or chalk
– Seam ripper (if necessary)
Step 1: Measure Your Skirt
Start by taking precise measurements of your skirt. Measure the waist, hip, and hem circumference to determine where you need to make adjustments. This will help you plan the alterations accordingly.
Step 2: Determine the Alteration Points
Identify the areas of the skirt that need to be adjusted. If the skirt is too small, you may need to take in the sides or add width to the waist and hip areas. If the skirt is too tight at the waist, you might need to let out the waistband or add a new one.
Step 3: Cut the Skirt
Using your fabric marker or chalk, mark the points where you will cut the skirt. If you are adding width, mark the new width you want to achieve. If you are taking in the sides, mark the points where you will remove the excess fabric.
Step 4: Remove Excess Fabric
With your scissors, carefully cut along the marked lines. If you are taking in the sides, cut the excess fabric away from the skirt. If you are adding width, cut the skirt into two pieces at the marked points and then sew the new width onto the skirt.
Step 5: Sew the Skirt Together
After removing the excess fabric, pin the skirt back together. Use your needle and thread to sew the skirt together, making sure to match the seams and hems. If you are adding a new waistband, sew it onto the skirt according to the pattern or instructions provided.
Step 6: Hem the Skirt
Finally, hem the skirt to your desired length. You can do this by folding the hem up and sewing it in place, or by using a serger to create a clean finish.
Step 7: Try on the Skirt
Once the alterations are complete, try on the skirt to ensure it fits properly. Make any necessary adjustments to the seams or hems, and you’re all set!
By following these simple steps, you can successfully alter your skirt from small to big, all by yourself. Not only will you have a custom-fitted skirt, but you’ll also have the satisfaction of completing a DIY project. Happy sewing!
